Export Incentives

Export incentives are aimed at encouraging and assisting exporters to increase and diversify the total value and volume of non-oil exports from Nigeria. These incentives are designed to address the major problems of supply, demand and price competitiveness of Nigeria’s export. Some of the incentives now take the form of Negotiable Duty Credit Certificate (N-DCC) and are as indicated below:

(i) MANUFACTURE – In – BOND SCHEME
The Manufacture – in – Bond Scheme is designed to encourage manufacturers to import raw material inputs and other intermediate products duty-free for the production of exportable goods, backed by a bond issued by any recognized financial institution. The bond will be discharged after evidence of exportation and repatriation of foreign exchange has been produced.

(i) The manufacturer-in-bound scheme (MIBS) shall be applicable to export manufacturers only.

(ii) Interested manufacturers should apply to the Federal Ministry of Finance using the prescribed forms.

(iii) For a manufacturer to enjoy the scheme, the factory premises must be approved for that purpose by the Nigerian Customs service.

(iv) Approval including the Import Requirement Certificate( IRS) should be obtained within a period of two months and transmitted to the Nigerian Customs service for implementation.

(v) The Nigerian Customs Service will determine acceptability guarantee Bond issued by Commercial or Merchant Bank or NEXIM or Insurance Companies covering not less than 110 per cent customs duty payable on each consignment.

(vi) Under this scheme, manufacturers of export commodities will be entitled to import duty-free raw material inputs, CKDS and intermediate inputs whether prohibited or not for the manufacture of export commodities.

(vii) The Manufacturer-in-Bond Scheme shall operate on an annual (12 calendar months) importation basis as the exporter wishes. For prohibited items however, the scheme shall operate Import by Import basis.

(viii) The Bond, which shall be effective from the date of its issuance by the Bank shall be discharged when the condition stipulated therein have been fulfilled.

(ix) The Nigerian Customs Service will periodically monitor the utilization of raw materials imported under this scheme until the Bond is fully executed.

(x) In the event of inability of any manufacturer to fulfill the conditions stipulated in the Bond, the manufacturer to fulfill the conditions stipulated in the Bond, the manufacturer shall apply to the Nigerian Customs Service through its approved dealer Bank, for an extension of the Bond particularly when the life of the Bond has expired. The extension of the Bond shall not exceed three months.

(xi) Repatriation of the foreign exchange realized from the transaction shall be confirmed by the Central Bank of Nigeria before the Bond is discharged.

(xii) Bill of Entry marked “Manufacturer-in-Bond Scheme” shall be used for clearance of goods under the scheme.

(xiii) A Committee comprising the Ministry of Finance, representatives of the Nigerian Customs Service, Nigerian export Promotion Council, Standard organization of Nigeria and the Central bank of Nigeria shall monitor the scheme. The monitoring body shall render a quarterly Report to the NMIBS Committee.

(xiv) In the event of default by the manufacturer, the Nigerian Customs Service shall redeem the Bond by calling on the guarantor to pay up the appropriate customs duties and other associated charges.

(xv) A manufacturer participating in the Manufacturer-in Bond Scheme is expected to designate a warehouse or store in his factory premises for the storage of inputs and finished goods; and

(xvi) Import Duty re[ort (IDR), clean Report of Findings (CRF), Form ‘M’ and other relevant documents for this scheme shall be clearly marked “MIB Scheme”.

Duty Drawback scheme provides for refunds of duties/sur-charges on raw materials including packing and packaging materials used for the manufacture of products upon effective exportation of the final products. The new Duty Drawback scheme shall give automatic refunds (60%) on initial screening by the Duty Drawback Committee and upon the presentation of bond from a recognized Bank, Insurance Company or other financial institution. The Bond will cover 60% of the refund to be made to the exporter and will only be discharged after final processing of the application has been made. At the end of the processing of exporters claims, the Duty Drawback Committee shall grant any balance where applicable or request for refunds for any over payment made.

The scheme provides for fixed drawback and individual drawback facilities. The fixed Drawback facility is for those Exporters/Producers whose export products are listed in the Fixed drawback schedule to be issued from time to time by the Committee. When the import content of the export produce is more or less constant, and import prizes (including exchange rate), tariff rates and technology used are relatively stable or “fixed”, it is possible to calculate a standard Impute-Output Co-efficient Schedule (ICS) for these category of products on the basis of which a fixed drawback rate can be computed to be rebated per unit of export product.

Whereas the individual drawback is for producers/exporters who do not qualify under the fixed drawback facilities. It is therefore a straightforward traditional drawback mechanism under which duty is paid on all import inputs. The duties are subsequently, rebated on inputs used for export production. As general case the final export./producer can apply for the Scheme.

A trading Company which collects industrial products from one or more manufacturers as well as a trading Company which imports raw material inputs including packaging and packaging materials used for the production of goods exported by him could also apply for the scheme. Such a trading company must have entered into a contract with final producer of the product in such a way that Duty drawback Committee can obtain necessary information and documents to enable the Committee act appropriately.

Applications must be companies incorporated in Nigeria.

Duty Drawback application must be filled within a maximum of two years from the date of exportation. In order to qualify for the drawback payment (both individual and fixed drawback) exportation of the product, which was produced with imported inputs, must be completed within 18 months after the importation of the inputs.

Application for either Fixed or individual Drawback Facilities should file the following documents to the Duty Drawback Committee.

(i) Completed new application form for Duty Drawback Rate/Refund obtained from the Duty Drawback Rate/Refund obtained from Duty Drawback Secretariat and all Zonal Offices of the Nigerian Export Promotion Council

(ii) Attach clear photocopies of the following documents in triplicates:

Import bill of entry for Home use (Customs and Excise Form C 188) for the respective raw material inputs used for the export production.

Import bill of landing for the raw material inputs used for the export production.

Letter of contract agreement between the Trading Company and producer in cases where the Trading Company is applying for the facility

Current registration certificate with NEPC

(iii) In addition to the above documents, all applications for refunds should be filed with the following in triplets:

Export Bill of Entry for Non-Domestic Goods (Customs and Excise Form sale 98)

(iv) Bank Bond to be issued by a recognized Bank or Insurance Company to the tune of 60 per cent up front payment approved by the Committee as duty drawback refund and to guarantee the refund of any overpayment made to the exporter.

The following rules have to be observed to simplify the processing procedures:

(i) For the same export product defined in an export entry documents, all inputs used to produce a given export article should be treated as part of a single application and therefore cannot be divided into separate duty drawback applications.

If imported inputs, registered in a single import entry document are sub-divided and used for production of more than one export consignment, the import entry document should include information on the production of inputs and the balance remaining to be used.

(ii) EXPORT EXPANSION GRANT (EEG) SCHEME

The scheme will operate the “Weighted Eligibility Criteria” in assessing application for EEG. The baseline data as supplied by individual applicant company would be used in its assessment. Thus the method of assessment is company specific. A company’s EEG assessment would be conducted once yearly and the determined rate will apply throughout the year.

The weighted eligibility criteria has four bands: 30% 20%,10%, and 5%. The following template will be used in assessing the incentive rate for every EEG applicant.

S/N Eligibility Criteria Company Data Threshold Weight Company Score
1 Local value added 25%
2 Local content 20%
3 Employment (Nigerians) 20%
4 Priority Sector 10%
5 Export Growth 20%
6 Capital Investment 5%
Total Weight 100%

 

A new entrant into the EEG scheme shall provide prior period financial statement or where applicable an investment plan for its assessment.

(i) Export must be registered with the Nigerian Export Promotion Council (NEPC).

(ii) Eligible exporter shall be a manufacturer producer or merchant of products of Nigeria origin for the export market (i.e. the products must be made in Nigeria).

(iii) An exporter must have a minimum annual export turnover of N5million and evidence of repatriation of proceeds of exports.

(iv) Exporter-company shall submit its baseline data which includes Audited Financial statement and information on operational capacity to NEPC.

Qualifying export transaction must have the proceeds fully repatriated within 180 days, calculated from the date of export.

(iii) EXPORT DEVELOPMENT FUND SCHEME

The Scheme provides financial assistance to private sector exporting companies to cover part of their initial expenses in respect of the following export promotion activities:

a) Participation in training courses, symposia, seminars and workshops in all aspects of export promotion

b) Advertising and publicity campaigns in foreign markets

c) Export market research and studies

d) Production design and consultancy

e) Participation in trade missions, buyer-oriented activities, overseas trade fairs, exhibitions and sales promotion

f) Cost of collecting trade information, and

g) Backing up the development of export oriented industries.

 

(iv) Trade Liberalization Scheme (TLS) of Economic Community of West African States (ECOWAS)

This is an export liberalization incentive that focuses on the ECOWAS sub-region. The Scheme is an incentive primarily geared towards export activities within the ECOWAS sub-region. The objective is to significantly expand the volume of intra-community trade in the sub-region via the removal of both tariff and non-tariff barriers to trade in good originating from ECOWAS countries. This affords preferential access to the ECOWAS market from Nigeria.

(v) OIL AND GAS FREE ZONE

The Oil and Gas Export Free Zone Act No. 8 of 1996 established an Oil and Gas Free Zone Authority to manage, control and co-ordinate all the activities within the zone. This zone encompasses three oil and gas service centres around the ports of Onne (near Port Harcourt), Calabar and Warri. All three ports have enhanced stacking and warehousing facilities awaiting subscribers. Incentives and fiscal measures approved by government that favour and encourage large investments in the region include:

· No personal income tax
· 100% repatriation of capital and profit
· No pre-shipment inspection for goods imported into the free zone.

(vi) NIGERIA EXPORT PROCESSING ZONES

The Federal Government of Nigeria has passed an aggressive Free Zone Law which has created a business friendly environment benefiting from the following incentives:

· Complete tax holiday for all Federal, State and Local Government taxes, rates, custom duties and levies.
· One-stop approval for all permits, operating licences and incorporation papers.

· Duty-free, tax-free import of raw materials for goods destined for re-export.

· Duty-free introduction of capital goods, consumer goods, components, machinery, equipment and furniture.

· Permission to sell 100% of manufactured, assembled or imported goods into the domestic Nigerian Market.

· When selling into the domestic market, the amount of import of import duty on goods manufactured in the free zones is calculated on the basis of the value of the raw materials or components used in assembly not the finished product.

· 100% foreign ownership of investments.

· 100% repatriation of capital, profits and dividends.

· Waiver of all import and export licenses.

· Waiver on all expatriate quotas for companies operating in the zones.

· Prohibition of strikes and lockouts.

· Rent-free land during the first 6 months of construction.

TAX INCENTIVES FOR OTHER LINES OF TRADE

(i) Exemption from tax of companies profits in respect of goods exported from Nigeria provided the proceeds are repatriated to Nigeria and used exclusively for purchase of raw materials, plants equipment and spare parts

ii) Exclusion from taxes the profits of companies whose supplies are exclusively from input to the manufacturing of products for exports.

iii) All new industrial undertakings including foreign companies and individual operating in an Export Processing Zone (EPZ) are allowed full tax holidays for three consecutive years.

iv) As a means of encouraging industrial technology, companies and other organizations that engage in research and development activities for commercialization enjoy 20% investment tax credit on their qualifying expenditure.

v) Dividends distributed by Unit in Nigeria are free of tax and no withholding tax is deducted there from since such incomes have already suffered tax in the first instance.

vi) All companies engaged wholly in fabrication of tools, spare parts and simple machinery for local consumption and export are to enjoy 25% investment tax credit on their qualifying capital expenditure while any tax payer who purchases locally manufactured plants and machinery are similarly entitled to 15% investment tax credit on such fixed assets bought for use.



Site Search

Join Our
Newsletter
Join our Newsletter today and recieve regular updates on our products and services.
Free PDF
Download
Download our company brouchers to find out more about what we do.

Business Development

Evaluating the performance of any business is a vital practice to assist in early detection

Find Out More

Little George P2P

Peer to peer lending (P2P) is an exceptional form of money lending where investors pool resources to fund a borrower's loan request.

Find Out More
'